RECHARGEABLE WORKLIGHT

Product sheet Return to list
LED bulb:20 cold light SMD + 20 warm light SMD + 4 red light SMD
Battery specifications:2 18650 lithium batteries (3.7V, 4400mAh)
Charging method:USB direct charging (including battery, USB cable, plug)
Charging time:4.5H
Charger specifications:5V 2A
Function mode:warm light/cold light/red light/red light flash
Mode brightness:300LM/300LM/20LM/-
Battery lasts for:3H/3H /8H/15H
Beam distance:23m/23m/-/-
Waterproof rating:IP54
Bluetooth signal distance:10m
Communication system:4.0 (can connect two devices)
Compatible configuration:A2DP, AVRCP, HFP
Supported coder/decoder:SBC, AAC
Working temperature:-20 ℃ to 40 ℃
Speaker impedance:4Ω (under 20 ℃ , 1.2KHz, 1V)
Frequency response:193Hz-20KHz
Speaker rated power:5W
Sound pressure:84dB
Specifications:89.5 x 85 x 83.5mm
Weight: 329g (including built-in battery)
When the light is on, long press the switch to adjust the brightness (100% -10% or 10% -100%)
When the brightness is at the maximum or minimum state, the bulb will flash twice
No operation for 6 seconds, it will turn off after pressing the switch
The name of the device is "E9390", the device could be connected
Press the WIFI button and the indicator light will flash, then you can connect with the electronic device
When connected with electronic equipment, the indicator will stay on; When disconnected, the indicator will flash.
The device will disconnect and automatically shut down without any operation in 10 minutes
  • PART# WARM/COLD/RED/RED FLASH
    (lm)
    TIMES
    (h)
    PACKING QUANTITY
  • E9390 300/300/20/—3/3/8/151